Specifications
RM 748.00
Inc. GST
The Windaus-Labortechnik Viewing Window, also known as a Secchi Disk, is a vital tool for assessing water clarity and light penetration. Designed with a 250 mm diameter, it features a four-segment configuration with alternating black and white sections to enhance visibility during measurements. Constructed from durable, hard-wearing plastic, the disk includes a lead weight to facilitate smooth lowering into the water. An approximately 15 cm high rod equipped with an eyelet allows for easy attachment of a lowering line, which is marked at 50 cm intervals for precise depth readings. Please note that the lowering line is sold separately.
This Secchi Disk is essential for environmental monitoring, research, and educational purposes, providing reliable measurements of water transparency and light penetration.
RM 748.00
Inc. GST
Manufacturer P/N
394328003
Part Number
6.267 808
Manufacturer
Windaus-Labortechnik
Description
Secchi Disk, diam. 250 mm, 4 areas (2 x black, 2 x white)
Manufacturer P/N
394328001
Part Number
7.072 324
Manufacturer
Windaus-Labortechnik
Description
Lowering line, 10 m, marked in intervals of 50 cm and 100 cm
Manufacturer P/N
394328009
Part Number
7.072 323
Manufacturer
Windaus-Labortechnik
Description
Secchi Disk, diam. 250 mm with eyelet without bottom line
It is a vital tool for assessing water clarity and light penetration. Designed with a 250 mm diameter, it features a four-segment configuration with alternating black and white sections to enhance visibility during measurements. Constructed from durable, hard-wearing plastic, the disk includes a lead weight to facilitate smooth lowering into the water. An approximately 15 cm high rod equipped with an eyelet allows for easy attachment of a lowering line, which is marked at 50 cm intervals for precise depth readings. Please note that the lowering line is sold separately.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
RM 748.00
Inc. GST
