Max. voltage
Min. voltage
Power supply
Specifications
Compare modelsRM 293,524.00
Inc. GST
The Thermo LYNX 4000 Centrifuge, 200-240 V, 50/60 Hz is a superspeed centrifuge designed for high-performance separations in research, bioprocessing, and everyday laboratory workflows. Featuring GreenCool technology, this Thermo centrifuge helps reduce environmental impact while supporting ozone-friendly operation and reliable performance with a wide range of tubes, bottles, and plates.
This superspeed centrifuge is a dependable solution for laboratories requiring flexible capacity, efficient rotor handling, and reliable separation performance.
The LYNX 4000 is designed for high-performance laboratory separations in research and bioprocessing. The stated format and features make the product suitable for routine laboratory work within that application.
The main specifications of the LYNX 4000 are that the traceability is Full GMP/GLP-compliant traceability with optional Thermo Scientific Centri-Log Plus Data Management software, the frequency is 50/60 Hz and the run time is Up to 99 h 59 min 59 s, with continuous operation. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The LYNX 4000 is suitable for high-performance laboratory separations in research and bioprocessing. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement. Where chemicals or solvents are involved, confirm that the product material is suitable for the specific substance and conditions before use.
The LYNX 4000 has a voltage specification of 200-240 V. This should be matched with the available laboratory power setup.
Manufacturer P/N
75008580
Part Number
4.712 498
Manufacturer
Thermo Scientific
Max. voltage
240 V
Manufacturer P/N
75008581
Part Number
4.712 499
Manufacturer
Thermo Scientific
Max. voltage
415 V
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
RM 293,524.00
Inc. GST
