Retsch Test Sieve, 200 x 50 mm, 25.00 mm Woven Wire Mesh, Stainless Steel, ISO 3310-1

The Retsch Test Sieve, 200 x 50 mm, 25.00 mm Woven Wire Mesh, Stainless Steel, ISO 3310-1 is designed for particle size determination and fractionation using a nominal aperture of 25.00 mm. Its stainless steel frame holds the woven wire mesh under tension for routine laboratory sieving.

Key Features:

• Brand: Retsch
• Diameter: 200 mm
• Height: 50 mm
• Aperture Size: 25.00 mm
• Sieve Surface: Woven Wire Mesh
• Material: Stainless steel frame and wire mesh
• Standard: ISO 3310-1
• Identification: Individual laser engraving for traceability
• Documentation: Test report supplied
• Application: Particle size determination, separation and fractionation
• Field of Application: Chemistry, pharmaceuticals, food, geology, metallurgy and construction materials
• Feed Material: Powders, bulk materials and suspensions, according to the selected sieving method

Choose this 25.00 mm sieve when your test method specifies a 200 mm diameter, 50 mm height and ISO 3310-1 construction. The individually marked frame and supplied test report support identification and laboratory records.

Frequently Asked Questions

1. What is the Retsch Test Sieve, 200 x 50 mm, 25.00 mm Woven Wire Mesh, Stainless Steel, ISO 3310-1 used for?

It separates a sample into fractions according to whether particles pass through the 25.00 mm openings. Use it individually or in a suitable sieve stack for material classification and particle size analysis.

2. What are the dimensions of the Retsch Test Sieve?

The sieve has a 200 mm frame diameter and a 50 mm height. Its nominal aperture is 25.00 mm. Match both the frame dimensions and aperture to your method and equipment.

3. What is the Retsch Test Sieve made from?

The frame and woven wire mesh are stainless steel. The frame provides stability during handling and sieve stack assembly.

4. Which standard applies to the Retsch Test Sieve?

This version is specified to ISO 3310-1. RETSCH supplies a test report; additional inspection or calibration documentation can be requested when required by your laboratory procedure.