Capillary connections
No. of blind plugs
No. of fittings
Specifications
Compare modelsRM 2,530.00
Inc. GST
The Bohlender b.safe Waste Cap S55 Electronic Fill-Level Control 3x UNF1/4"", 1x GL14 is a reliable and durable solution for waste management in laboratory settings. This cap features a free movable insert made of PTFE for secure connection of capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives suitable for tubing with I.D. 5.5 to 8 mm. It includes connections for 3x UNF1/4"" capillaries and 1x GL14 exhaust filter thread. The permanently mounted 400 mm cable allows connection to the b.safe display for accurate fill-level monitoring, while the red indicator pin enables easy visual level checks. A b.safe exhaust air filter can be screwed into the GL14 thread (filter not included).
Scope of Supply:
This electronic fill-level control cap is a critical component for laboratories requiring precise and safe waste management and monitoring systems, combining durability with functional versatility for various laboratory setups.
Hose connectors for Waste Caps
RM 2,530.00
Inc. GST
Manufacturer P/N
M 205-40
Part Number
4.681 569
Manufacturer
Bohlender
Capillary connections
3
RM 2,629.00
Inc. GST
Manufacturer P/N
M 205-41
Part Number
4.681 570
Manufacturer
Bohlender
Capillary connections
2
It is a reliable and durable solution for waste management in laboratory settings. This cap features a free movable insert made of PTFE for secure connection of capillaries (O.D. 1.6/2.2/3.2 mm) and hose olives suitable for tubing with I.D. 5.5 to 8 mm. It includes connections for 3x UNF1/4" capillaries and 1x GL14 exhaust filter thread. The permanently mounted 400 mm cable allows connection to the b.safe display for accurate fill-level monitoring, while the red indicator pin enables easy visual level checks. A b.safe exhaust air filter can be screwed into the GL14 thread (filter not included).
_0.png&w=3840&q=75)
7 mins read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
7 mins read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
9 mins read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
9 mins read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
6 mins read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
