For
Specifications
Compare modelsRM 86,036.50
Inc. GST
The BINDER Pump Cabinet VDL 056 + VP5 EX is a complete set designed for use with the VDL series vacuum drying oven. It includes the VP5 EX vacuum pump, pump cabinet under cabinet, and a connection kit for connecting the pump to the vacuum drying oven.
This pump cabinet set provides a practical solution for housing and connecting the VP5 EX vacuum pump with the BINDER VDL series vacuum drying oven.
The VDL 056 + VP5 EX is designed for raises the vacuum drying chamber to an ergonomic working height, reduces pump noise, and protects the pump from mechanical damage. The stated format and features make the product suitable for routine laboratory work within that application.
The main specifications of the VDL 056 + VP5 EX are that the includes is VP5 EX vacuum pump, pump cabinet, and connection kit and the exhaust port is Ø 100 mm on the rear wall for connection to an on-site exhaust system. These are the main selection points to compare with the requirements of the laboratory task.
Yes. The VDL 056 + VP5 EX is suitable for raises the vacuum drying chamber to an ergonomic working height, reduces pump noise, and protects the pump from mechanical damage. The product is designed specifically for that type of work when its stated format and operating characteristics match the laboratory requirement.
The VDL 056 + VP5 EX is made from Stainless steel drip tray. Material is an important selection factor for durability and application suitability.
Accessories for chemical membrane pumps VP
Manufacturer P/N
8012-2629
Part Number
4.714 160
Manufacturer
BINDER
For
VDL 56
Manufacturer P/N
8012-2628
Part Number
4.714 159
Manufacturer
BINDER
For
VDL 23
Manufacturer P/N
8012-2630
Part Number
4.714 161
Manufacturer
BINDER
For
VDL 115
The VDL 056 + VP5 EX is designed for raises the vacuum drying chamber to an ergonomic working height, reduces pump noise, and protects the pump from mechanical damage. The stated format and features make the product suitable for routine laboratory work within that application.
_0.png&w=3840&q=75)
1 min read
Cleaning laboratory glassware properly is essential for accurate, safe, and repeatable lab work. This guide explains how to remove stubborn residue from beakers, flasks, bottles, volumetric glassware, and other lab glassware, including grease, dried salts, biological residue, stains, and burnt deposits. It also covers safe cleaning methods, common mistakes, drying and storage tips, and when damaged glassware should be replaced.
1 min read
Pipette calibration helps laboratories confirm that liquid handling results remain accurate, repeatable, and traceable. This guide explains how pipettes are calibrated to ISO 8655 standards, including gravimetric testing, environmental control, correct tip selection, volume testing, calibration records, and common mistakes to avoid. It also covers when to use in-house calibration and when an external calibration service may be more suitable.
1 min read
A free molarity and dilution calculator covering four essential lab calculations: C1V1=C2V2 dilution (solve for any unknown), molarity from mass, mass from molarity, and serial dilution table generation. Includes worked examples, a concentration units guide and step-by-step preparation instructions for every result.
1 min read
Free online buffer preparation calculator. Select your buffer system, enter target pH, concentration and volume, and get an exact lab-ready recipe with reagent masses and step-by-step instructions. Covers PBS, Tris-HCl, sodium phosphate, acetate, HEPES, MOPS and more.
_0.png&w=3840&q=75)
1 min read
Laboratory balances are essential weighing instruments used to measure samples, reagents, powders, chemicals and materials with accuracy and consistency. They are commonly used in research, education, quality control, pharmaceutical testing, food testing, industrial laboratories and general scientific workflows.
RM 86,036.50
Inc. GST
