RM 4,889.50
Inc. GST
RM 6,435.00
RM 1,050.50
Inc. GST
RM 1,298.00
RM 2,783.00
Inc. GST
RM 3,432.00
RM 5,269.00
Inc. GST
RM 6,495.50
RM 2,260.50
Inc. GST
RM 2,788.50
RM 1,441.00
Inc. GST
RM 1,776.50
RM 2,783.00
Inc. GST
RM 3,432.00
RM 5,269.00
Inc. GST
RM 6,495.50
RM 1,705.00
Inc. GST
RM 2,101.00
RM 3,938.00
Inc. GST
RM 4,851.00
RM 2,783.00
Inc. GST
RM 3,432.00
RM 2,458.50
Inc. GST
RM 3,030.50
RM 1,705.00
Inc. GST
RM 2,101.00
RM 1,705.00
Inc. GST
RM 2,101.00
RM 5,269.00
Inc. GST
RM 6,495.50
RM 4,790.50
Inc. GST
RM 5,901.50
RM 5,054.50
Inc. GST
RM 6,231.50
RM 4,790.50
Inc. GST
RM 5,901.50
Showing 225 - 256 of 2302 results
RM 352.00
Inc. GST
RM 269.50
Inc. GST
RM 627.00
Inc. GST
RM 434.50
Inc. GST
RM 522.50
Inc. GST
RM 401.50
Inc. GST
RM 214.50
Inc. GST
RM 324.50
Inc. GST
RM 407.00
Inc. GST
RM 313.50
Inc. GST
RM 429.00
Inc. GST
RM 610.50
Inc. GST
RM 533.50
Inc. GST
RM 885.50
Inc. GST
RM 1,309.00
Inc. GST
RM 5,054.50
Inc. GST
RM 6,231.50
RM 6,924.50
Inc. GST
RM 8,530.50
RM 7,188.50
Inc. GST
RM 8,860.50
RM 1,919.50
Inc. GST
RM 2,365.00
RM 3,492.50
Inc. GST
RM 5,054.50
Inc. GST
RM 6,231.50
RM 2,029.50
Inc. GST
RM 2,502.50
RM 3,184.50
Inc. GST
RM 3,927.00
RM 5,324.00
Inc. GST
RM 6,556.00
RM 6,924.50
Inc. GST
RM 8,530.50
RM 8,789.00
Inc. GST
RM 10,829.50
RM 4,790.50
Inc. GST
RM 5,901.50
RM 4,790.50
Inc. GST
RM 5,901.50
RM 4,889.50
Inc. GST
RM 6,435.00
RM 12,254.00
Inc. GST
RM 15,097.50
RM 2,431.00
Inc. GST
Frequently asked questions
An overhead stirrer is necessary for high-viscosity liquids or large volumes where a magnetic stir bar would lose "coupling." They offer more power and allow for different impeller shapes to suit specific mixing patterns. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.
The choice depends on the desired flow: propeller impellers create axial flow for general mixing, while anchor or paddle impellers are better for high-viscosity fluids or preventing sedimentation at the bottom of the vessel. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
While most vortex mixers are designed for short "touch" bursts to quickly mix small tubes, many of the professional models feature a "continuous" mode for use with plate or tube-rack attachments for longer mixing periods. Laboratories should compare speed or shaking range, vessel geometry, and temperature control and document the selected setup for consistent use.
Digital models allow for precise temperature and speed settings, often featuring feedback control via external sensors. This ensures that your sample stays at the exact temperature required, which is critical for sensitive chemical reactions. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
For cell culture, an orbital shaker with gentle motion and low CO2/humidity resistance is often required. These are designed to be placed inside incubators to provide continuous aeration and nutrient distribution without damaging cells. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.