RM 4,889.50
Inc. GST
RM 6,435.00
RM 2,783.00
Inc. GST
RM 3,432.00
RM 5,269.00
Inc. GST
RM 6,495.50
RM 2,260.50
Inc. GST
RM 2,788.50
RM 1,441.00
Inc. GST
RM 1,776.50
RM 2,783.00
Inc. GST
RM 3,432.00
RM 5,269.00
Inc. GST
RM 6,495.50
RM 1,705.00
Inc. GST
RM 2,101.00
RM 3,938.00
Inc. GST
RM 4,851.00
RM 2,783.00
Inc. GST
RM 3,432.00
RM 2,458.50
Inc. GST
RM 3,030.50
RM 1,705.00
Inc. GST
RM 2,101.00
RM 1,705.00
Inc. GST
RM 2,101.00
RM 5,269.00
Inc. GST
RM 6,495.50
RM 4,790.50
Inc. GST
RM 5,901.50
RM 5,054.50
Inc. GST
RM 6,231.50
RM 4,790.50
Inc. GST
RM 5,901.50
RM 5,054.50
Inc. GST
RM 6,231.50
Showing 321 - 352 of 2022 results
RM 10,829.50
Inc. GST
RM 77.00
Inc. GST
RM 99.00
Inc. GST
RM 2,651.00
Inc. GST
RM 3,096.50
Inc. GST
RM 17,237.00
Inc. GST
RM 390.50
Inc. GST
RM 726.00
Inc. GST
RM 979.00
Inc. GST
RM 929.50
Inc. GST
RM 434.50
Inc. GST
RM 368.50
Inc. GST
RM 412.50
Inc. GST
RM 550.00
Inc. GST
RM 10,994.50
Inc. GST
RM 2,656.50
Inc. GST
RM 2,656.50
Inc. GST
RM 23,039.50
Inc. GST
RM 22,038.50
Inc. GST
RM 22,588.50
Inc. GST
RM 22,038.50
Inc. GST
RM 225.50
Inc. GST
RM 13,409.00
Inc. GST
RM 42,058.50
Inc. GST
Frequently asked questions
An overhead stirrer is necessary for high-viscosity liquids or large volumes where a magnetic stir bar would lose "coupling." They offer more power and allow for different impeller shapes to suit specific mixing patterns. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.
The choice depends on the desired flow: propeller impellers create axial flow for general mixing, while anchor or paddle impellers are better for high-viscosity fluids or preventing sedimentation at the bottom of the vessel. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
While most vortex mixers are designed for short "touch" bursts to quickly mix small tubes, many of the professional models feature a "continuous" mode for use with plate or tube-rack attachments for longer mixing periods. Laboratories should compare speed or shaking range, vessel geometry, and temperature control and document the selected setup for consistent use.
Digital models allow for precise temperature and speed settings, often featuring feedback control via external sensors. This ensures that your sample stays at the exact temperature required, which is critical for sensitive chemical reactions. Before ordering, confirm speed or shaking range, vessel geometry, and temperature control and any accessories or consumables needed for routine use.
For cell culture, an orbital shaker with gentle motion and low CO2/humidity resistance is often required. These are designed to be placed inside incubators to provide continuous aeration and nutrient distribution without damaging cells. The final choice should reflect speed or shaking range, vessel geometry, and temperature control, as these points influence day-to-day compatibility and repeatability.